Training / Online / Introduction to SIDRA

Introduction to SIDRA. Hands-on, from the ground up.

Learn how to use SIDRA INTERSECTION 11 from the ground up in this hands-on four-day online training program prepared by Dr Rahmi Akçelik and Mark Besley.

01 / Audience

Who should attend.

Little or no knowledge of SIDRA

The INTRODUCTION TO SIDRA online training program is offered for people with little or no knowledge of SIDRA. This training focuses on how to use SIDRA, teaching the basic aspects of the software including general features of the user interface, input data entry and a good level of output familiarity.

The program combines hands-on sessions and instructions to teach participants how to use the SIDRA INTERSECTION 11 software through many examples. This program has been prepared by Dr Rahmi Akçelik and Mark Besley, the developers of the SIDRA INTERSECTION software.

Please note

This program teaches hands-on software use and does not cover traffic modelling theory. SIDRA Model Fundamentals is recommended for learning the essential concepts of traffic modelling and principles of traffic analysis.

02 / Program contents

A preliminary session and three modules over four days.

9 worked examples · Practice examples · Q&A each day

INTRODUCTION TO SIDRA consists of a Preliminary Session and three Modules held over four days. Open each section for the full program detail.

PreliminaryDay 1 · Tue 24 NovFamiliarisation with Livestorm and the SIDRA User InterfaceOne hour, 10:00 to 11:00 am
P1Livestorm and SIDRA INTERSECTIONDescription of Livestorm. Starting SIDRA INTERSECTION.
P2SIDRA User InterfaceRibbon, Tabs, Project Pane and Display Pane. Accessing Site input dialogs. Saving project files and accessing pre-installed example files.
P3SIDRA Input Using an ExampleCreating a new Site. Viewing Layout. Using Intersection, Lane Geometry and Volumes dialogs to make various changes. Saving Project. Cloning and Deleting Sites and Folders.
P4Processing and OutputProcessing the Site. Selecting Site Reports and Site Displays tabs, opening Lane Summary and Movement Displays. Creating new Vertical Tab Group.Q&A
Module 1Day 2 · Wed 25 NovSIDRA Basics, Roundabouts, Signalised IntersectionsIntroduction to Networks
1.1SIDRA Basics for New UsersProjects, Sites, Networks, Routes, CCGs. User Guide and Help. Where Is Input? Where Is Output? SIDRA User Interface (Site, Network and Tools Tab Ribbons).
1.2Intersection Analysis (Site Tab)Project Pane and Display Pane. Folders and Sites. Accessing Project, Folder and Site Menus. Site Input dialogs. Movement Classes and Site Movements. Lane Movements. Approach and Exit Lane Numbers.
Ex 1Two-Lane RoundaboutInput Parameters: Volume Data Settings and Volumes. Roundabout geometry parameters. Strip islands and roundabout splitter islands. Approach and Exit Short Lane Length. Grade data. Approach and Exit Distance. Entering Geometry and Volume data. Analysis: Output for lanes and movements. Design Life Analysis.Q&A
Ex 2Signalised IntersectionSpecifications, data entry, processing and output. Intersection geometry, Grade, Volumes, Pedestrians. Phasing & Timing. EQUISAT (Fixed Time / SCATS) Timing Analysis. Signal timing analysis output.Q&A
1.3Introduction to SIDRA Network ModelSIDRA Network model main features. Network examples. SIDRA Network Templates.Practice Example · Q&A
Module 2Day 3 · Thu 26 NovSign Control, Roundabout Corridor and Signalised Network ModellingSignal coordination
Ex 3Stop-Sign Controlled T-IntersectionGeometry and Volume input. Sign Control Analysis report. Gap Acceptance Model (Apply TWSC Calibration. Critical Gap and Follow-up Headway). Pedestrians at Sign-Controlled Intersections. Degree of saturation, delay and back of queue for the critical movement.Q&A
2.1SIDRA Network Model Important FeaturesNetwork Analysis Settings. Network Connection: meaning and conditions. Network Tab Project Pane (Folders, Networks and Routes; Input dialogs).
Ex 4Roundabout Corridor with a Signalised IntersectionConfiguring Network and Routes. Network Data, Approach Distances. Network Timing. Analysis Results: Network Summary, Approach Displays, Lane Displays, Movement Displays, Midblock Flows, Lane Changes, Lane Flows, Movement Flows. Extra Bunching.Q&A
Ex 5aTwo-Site Signalised NetworkConfiguring Network. Network Timing. Network Analysis results: Movement Flows, Midblock Flows, Blockage Probability. Capacity Reduction, Capacity Constraint.Q&A
2.2Signal CoordinationInput parameters relevant to Signal Coordination. Offset Definition. Platoon model using signal offsets. Arrival Types. Stopline Travel Time.
Ex 5bTwo-Site Signalised Network: Signal CoordinationConfiguring Routes. Network Timing. Offset calculations for Routes. Signal Phase Timings. Time-Distance display for Routes. Interactive Offsets for Two-Way Progression. Route Travel Time and Level of Service.Practice Example · Q&A
Module 3Day 4 · Fri 27 NovSIDRA Output, Calibration, Pedestrian CrossingsSIDRA Tools, Manage Output
3.1Pedestrians at Signalised IntersectionsCrossing options. Pedestrian Actuation. Crossing Distances and Crossing Speeds.
Ex 6Midblock Signalised Pedestrian CrossingInput data entry. Using Lane Utilisation Ratio for Unequal Lane Flows.
Ex 7Midblock Unsignalised (Zebra) Pedestrian CrossingInput data entry, processing and output. Zebra Crossing gap acceptance model.
Ex 8Pedestrian Actuation EffectsEffect of the Pedestrian Actuation parameter on signal timings and vehicle and pedestrian performance.Q&A
3.2Tools and Manage Tabs, Input Comparison, Output ComparisonInput Comparison: Site (Example 8). Output Comparison: Network (Example 4 with different cycle times for the signalised Site). Site, Network, Route Output Tabs. Output Dialogs (Examples).
3.3Manage Output and User Interface OptionsExamples: Customise Output, Displays, Output Parameters. User Interface and Layout options.
3.4SIDRA Output for Sites, Networks and RoutesExample 4 (Roundabout Corridor): Familiarise with output reports and displays. Intersection Summary. Fuel, Emission & Cost. Queue Analysis. Graphs and Variable Run. Lane LOS. Roundabout Analysis. Network Summary. Route Travel Performance. Midblock Flows. Lane Changes. Lane Flows, Movement Flows. Network Routes Output. Colour Codes in Output Displays for Sites, Networks and Routes.Q&A
3.5Site and Network TemplatesSite Templates accessible via Add New Site under the Site Tab. Network Templates accessible via Import from Template under the Network Tab.
3.6Model CalibrationKey parameters for model calibration. Queue Space. Saturation Flow Survey Method and SCATS MF.
Ex 9Saturation Flow CalibrationQ&A
3.7Map Extract, User Reports, Output to PDFMap Extract demo. Setting up and using User Report Templates for Site, Network and Route User Reports. Output to PDF.
3.8Category Setup, Project SummaryCategory Setup and Select Category Dialog. Project Summary.
3.9VOLUMES UtilityQ&A · Training Evaluation Survey

Training books in PDF format and SIDRA INTERSECTION project files are sent to attendees before the program. We also recommend watching the tutorial videos before the training. The program closes with a training evaluation survey.

03 / Presenters

The people who built the model.

3 presenters · SIDRA SOLUTIONS, Melbourne
01Dr Rahmi AkçelikDirector, SIDRA SOLUTIONS. Author of SIDRA INTERSECTION and SIDRA TRIP.

Rahmi Akçelik is a leading scientist and software developer with 50 years of practical, research and training experience in road traffic operations, traffic engineering, management and control. He is Director of Akcelik and Associates Pty Ltd, trading as SIDRA SOLUTIONS.

He has more than 350 technical publications and is the author of the SIDRA INTERSECTION and SIDRA TRIP software packages. He has trained several thousand professionals in over 300 workshops, courses and seminars.

Awards include the 2014 Roads Australia Award for Technical Excellence, the 2008 ITE ANZ Contribution to the Transportation Profession Award, the 1999 Clunies Ross National Science and Technology Award, and the 1986 ITE US Transportation Energy Conservation Award.

02Mark BesleyScientist and software specialist. Development of SIDRA INTERSECTION for over 30 years.

Mark Besley is a scientist and software specialist who has worked in the traffic management area since the 1980s. He has made a significant contribution to the development of SIDRA INTERSECTION in collaboration with Rahmi Akçelik during the last 30-plus years, and has trained several thousand professionals in over 300 workshops, courses and seminars.

Mark has been involved in many aspects of research on traffic operations including traffic network models, incident detection, fuel consumption estimation, and traffic data collection and analysis.

03Dr Ian EspadaSenior Traffic Modeller and Analyst, SIDRA SOLUTIONS.

Ian Espada is a Senior Traffic Modeller and Analyst at SIDRA SOLUTIONS with more than 20 years of experience as a researcher, transport planner, demand modeller and transport economist. He holds a PhD from the University of Tokyo and previously led the Network Operations Team at the Australian Road Research Board.

Ian was a sessional lecturer on transport demand modelling at Swinburne University for 10 years and served as the Australian representative to the World Road Association technical committee on road network operations from 2016 to 2019.

04 / CPD and PDH

Ten hours towards your CPD.

1 contact hour = 1 PDH · Certificate of completion

This program is suitable for 10 hours of Continuing Professional Development (CPD) or Professional Development Hours (PDH). A certificate of completion is provided to all attendees, documenting contact hours and learning outcomes.

Learning outcomes5
01Set up and configure SIDRA INTERSECTION projects for a range of intersection types.
02Input geometric, traffic and signal data for intersection and network analysis.
03Analyse and interpret SIDRA output reports, graphs and performance summaries.
04Apply SIDRA to practical scenarios including design assessment and option comparison.
05Understand network modelling capabilities for corridor and precinct analysis.
Eligible for CPD/PDH with6
01Engineers AustraliaCPD Type II (short courses, workshops and seminars).
02Engineering New ZealandCounted towards your 40-hour annual CPD requirement.
03US State PE BoardsGenerally accepted as Professional Development Hours (PDH), 1 contact hour = 1 PDH. Acceptance rules vary by state board.
04Transport Professionals Association (Australia)Self-allocated CPD points based on contact hours.
05Planning Institute of AustraliaRecognised external CPD activity.
06Other professional bodies worldwideContact hours documented for your CPD records.

SIDRA Training is not just about intersection and network analysis, but aims to improve general understanding of operational analysis of all traffic facilities.

Dr Rahmi Akçelik · Director, SIDRA SOLUTIONS

SIDRA INTERSECTION training is delivered by the SIDRA development team, backed by over 50 years of peer-reviewed research and over 400 workshops delivered worldwide. All programs are delivered under our ISO 9001 Quality Management System (Certificate QEC27492). CPD and PDH recognition

05 / Before you attend

Four things to read first.

Setup · Licence · Units · Conditions
01Setup requirementsLivestorm runs in the browser, no installation. Two monitors are required for this program. Current Chrome or Edge, and network access to Livestorm. Full setup, firewall guidance and Livestorm requirements on the documentation site.docs ↗
02SIDRA INTERSECTION softwareTraining uses the latest version of SIDRA INTERSECTION 11. Before the session, each attendee receives a temporary licence and a download link. To use your own SIDRA INTERSECTION 11 licence, update it to the latest version first. If you are unsure about anything, contact us before the training begins.Temporary licence
03Units and displaysPresentations and SIDRA project files use the SIDRA Standard Left setup: left-hand traffic rule and metric units. The training is in English.Standard Left
04ConditionsNo recording of any kind, video or audio. Only the registered attendee may attend; to transfer a registration to a colleague, contact us before the event. Transfer between sessions is not allowed. Fees are non-refundable for change of mind; another delegate may be substituted free of charge, arranged in advance. This does not limit your rights under the Australian Consumer Law, including remedies for a major fault.On registration
Register now

Introduction to SIDRA, 24 to 27 November 2026.

Four-day online training · 10 hrs CPD/PDH
Early bird A$1,386 to Saturday 24 October · Standard A$1,485 · AUD inc. GST

Register for TE175